This problem has been reported under UnixWare 1. So the driver will attempt to round-up the virtual X dimension to a multiple of 64, but leave the virtual resolution untouched. Most of the Chips and Technologies chipsets are supported by this driver to some degree. Hence the maximum dot-clock might need to be limited. So with the ” Overlay ” option, using the ” SetMClk ” option to reduce the speed of the memory clock is recommended. Powered by Create your own unique website with customizable templates. If you find you truly can’t achieve the mode you are after with the default clock limitations, look at the options ” DacSpeed ” and ” SetMClk “.

Uploader: Mabar
Date Added: 1 July 2004
File Size: 9.60 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 10882
Price: Free* [*Free Regsitration Required]

In this way the expensive operation of reading back to contents of the screen is never performed and the performance is improved. A xhips of an incomplete ” xorg. This chip is specially manufactured for Toshiba, and so documentation is not widely available. If you have a problem with the acceleration and these options will allow you to isolation the cuips. However, 8 and 24 bit colour depths seem to work fine.

By default linear addressing is used on all chips where it can be set up automatically. The HiQV series of chips doesn’t need technoligies use additional clock cycles to display higher depths, and so the same modeline can be used at all depths, without needing to divide the clocks.

Using these should give you all the capabilities you’ll need in the server to get a particular mode to work.

Recent Drivers  ASUS DRW-2014S1T DRIVERS

Note that linear addressing at 1 and 4bpp is not guaranteed to work correctly. Many DSTN screens use the top of video ram to implement a frame accelerator. When the size of the mode used is less than the panel size, the default behaviour of the server is to align the left hand edge of the 685554 with the left hand edge of the screen.

Additionally, the ” Screen ” option must appear in the device section. Note that many chips are capable of higher memory clocks than actually set by BIOS. The overlay consumes memory bandwidth, so that the maximum dotclock will be similar to a 24bpp mode. You can avoid this by either using the ” NoStretch ” option or removing the HWcursor ” option. This information will be invaluable in debugging any problems.

Try deleting theses options from xorg. This is a debugging option and general users have no need techjologies it. It should be noted that if a flat panel is used, this it must be allocated to ” Screen 0 “.

This is useful to see that pixmaps, tiles, etc have been properly cached. Similar to the but also incorporates “PanelLink” drivers. It has the same ID and is identified as a when probed.

DriverHive Details for Chips and Technologies (Asiliant) Driver

It also includes a fully programmable dot clock and supports all types of flat panels. Mobile, Mac OS and Linux users can choose other download options by chipe the installer checkbox below the download button. Further to this some of the XAA acceleration requires that the display pitch is a multiple of 64 pixels. It is enabled by default for machines since the blitter can not be used otherwise.


For chipsets incapable of colour depths greater that 8bpp like thethe dotclock technolkgies is solely determined by the highest dotclock the video processor is capable of handling. For 24bpp on TFT screens, the server assumes that a 24bit bus is being used. Hardware cursors effectively speeds all graphics operations as the job of ensuring that the cursor remains on top is now given to the hardware. This is the first version of the of the ctxx that was capable of supporting Hi-Color and True-Color.

For chipsets that support hardware cursors, this option enforces their use, even for cases that are known to cause problems on some machines. However some video ram, particularly EDO, might not be fast enough to handle this, resulting in drawing errors on the screen. Alternatively the manufacturer could have incorrectly programmed the panel size in the EGA console mode.

Information for Chips and Technologies Users

An 8bpp one and a 16bpp one. If you get pixel error with this option try using the ” SetMClk ” option to slow the memory clock. The ct supports dual-head display. So with the ” Overlay ” option, using the ” SetMClk ” option to reduce the speed of the memory clock is recommended.